Select a different country or region to see content for your location.
United States
23:53:50 GMT+0000 (Coordinated Universal Time)
LFS42-CE
Guideway
hollow section profile, fixing hole spacing half of standard, with two raceway shafts; corrosion-resistant design possible
Product information
Bending axes
Metric
Imperial
Main Dimensions & Performance Data
| h | 20 mm | Height |
| b | 42 mm | Width |
| lmax | 6.000 mm | Length maximum 1 |
| ly | 33.929 mm⁴ | Second moment of area |
| lz | 14.052 mm⁴ | Second moment of area |
| LFQ | 358 mm² | Cross-sectional area 2 |
| Wy | 1.858 mm³ | Wider resistance torque |
| Wz | 1.391 mm³ | Wider resistance torque |
Mounting dimensions
| N1 | 9 mm | Bore diameter 3 |
| N3 | 15 mm | Bore diameter 4 |
Dimensions
| a2 | 32 mm | Distance |
| aL max | 51 mm | Distance 5 |
| aL min | 20 mm | Distance 5 |
| aR max | 51 mm | Distance 5 |
| aR min | 20 mm | Distance 5 |
| b1 | 28 mm | Width |
| dLW | 10 mm | Diameter |
| eZ | 10,1 mm | Distance |
| h1 | 12 mm | Height 6, 7 |
| h4 | 12,6 mm | Height |
| jL | 62,5 mm | Increment 8 |
Footnotes
1
2
Value for cross-sectional area.
3
For screw to DIN 912-8.8 (DIN EN ISO 4762),
under maximum load support washers to DIN 433 (DIN EN ISO 7092) are required.
4
Under maximum load Fz and F0z, support washers to DIN 433 and the maximum tightening torque (see mounting instructions) are required.
5
6
If support washers to DIN 433 are used, screws to DIN 7984 are recommended.
7
8
Downloads:
Your current product variant
| Size code | 42 | |
| Design | C | hollow section profile |
| Locationg guideway | E | fixing hole spacing half of standard |