text.skipToContent
text.skipToNavigation

Users can import files into their own CAD systems directly

Product Selection and CAD Download

In cooperation with TraceParts, Schaeffler has now extended the services for its products.

In addition to eCommerce Industrial, the product selection and support system, now all 2D drawings and 3D models are available on the "TraceParts online" portal.

Now you can obtain design data for INA and FAG products by importing them from TraceParts's "TraceParts online" portal.
 

You can do this in one of two ways:
 
  • Directly on our eCommerce site: Search your product via the product selection and support system, select the product desired and this will take you to the page containing the information that can be downloaded directly
     
  • Go to the INA or FAG design data start page in the "TraceParts online" portal and select the desired product: 
    INA/FAG products at TraceParts online

Note:

You want to use a CAD file in your CAD system that was created by INA or FAG. INA and FAG CAD drawings and models are created with great care and the information is checked for accuracy. However, we do not know the installation situation and the operating conditions for the product. In addition, different representations may occur due to different configurations of the CAD systems.

Due to the constant further development of the products, we reserve the right to make changes to the product range and the product design. The product geometry is shown in simplified form and may deviate from the real product. INA and FAG CAD drawings and models do not constitute a guarantee of quality or durability in the legal sense and do not replace the usability of the products to be verified by you.

We reserve all rights to trademarks, brands, patents, drawings and models. The installation situation and the operating conditions for the product are not known to us; in addition, different representations may occur due to different configurations of the CAD systems. All our information, drawings, models or representations in your CAD system are provided without guarantee.

We therefore strongly recommend that:

  • All relevant mounting dimensions should be checked using the information in the dimension drawing

  • The suitability, performance capability and the expected life of the product should be checked using appropriate methods: calculation program

  • The suitability of the product should be checked by means of tests

  • In case of doubt, please consult our engineering service